Dry&Clean

Lifa Dry & Clean is designed to remove moisture (dehumidification) and clean the air.

1 + 1 + 1> 3 = EXCELLENT SOLUTION
LifaDry & Clean features:
· Removal of water (moisture) from the air  

· Removal of solid particles from the air

· Removal of gaseous impurities from the air

Using LifaDry & Clean:

· Elimination of damage caused by water, mold, drainage of premises

· Control of humidity, dust and emissions at a new construction site

· Air pollution control at work site

· First aid for moisture damage

· Cleaning and drying of air on the lower floors of buildings

LifaDry & Clean Multifunctional Air Purification System was developed specifically for drying, filtering and maintaining air dilution during the reconstruction of buildings damaged by water and mold.

LifaDry & Clean — multifunctional machine for drying and air purification after reconstruction work. When using such a machine, people are not exposed to harmful substances during operation. Air purification with conventional filters (HEPA) is not sufficient, as moisture quickly destroys the filters. LifaDry & Clean solves this problem by drying the air before it begins to filter.

The increase in pathogens during the dismantling of buildings is a significant health hazard. When using the multi-functional air purification system LifaDry & Clean, this problem is completely eliminated.

Installation removes moisture from air and surfaces. At the same time, using a HEPA filter (= microfilter), it removes solid particles from the air, such as mold spores, asbestos fibers. Also, the machine removes gaseous impurities, such as mold poisons, excretions from building materials. The car has been tested. The machine retains more than 99.97% of particles larger than 0.3 mm. The machine complies with the requirements used when working with asbestos, is also well suited for controlling moisture, dust and emissions in new work areas. It can be used as a first aid for water damage for drying and air purification prior to the start of reconstruction work.

LifaDry & Clean is effectively used for cleaning and drying the air on the lower floors of buildings (basements). Dry & Clean can be installed on the lower floors of buildings to control moisture, temporarily or permanently.

The machine is equipped with various filters for operation.

The principle of the machine: the machine removes moisture and cleans the air. Moisture removal section operates on the principle of condensation. To do this, use environmentally friendly refrigerant R404A.

The air directed by the fan passes through the pre-filter, the evaporator, and then enters the condenser. The air is cooled below the dew point in a cold evaporator. Water, evaporating from the air, condenses on the surface of the walls of the evaporator and flows into the pan. The machine is equipped with a pump that pumps out the accumulated water. In the case of frost (icing) on ​​the walls of the evaporator, automatic defrost is activated.

The air temperature inside the system becomes higher than room temperature by 3-5 ºС. From the condenser, air passes through a HEPA filter (= microfilter), in which solid particles are trapped, and also through an activated carbon filter to remove gaseous impurities.

After filtration and drying, clean air comes out with a fan. The flexible pipe (corrugation) of the cleaning system can be installed near the work site. Harmful substances generated during the work, get directly into the cleaning system before they have time to spread throughout the construction site.

With the help of corrugations dirty air can be removed far beyond the construction site.

 

© 2019 Alfavent. All Rights Reserved.

Website development - studio "WEB-CAPITAL"